Phase 1
New quotes
Purchase Order
Cost Catalog — TruPro Pricing

Prices here save for the whole team and sync to every signed-in phone. Roof packages, gutters and fences are TruPro's own prices. Other fields you never change keep following the Verisk (TXTW) rate file; a price you set overrides it until you set it back.

Roofing — Installed Roof System (per square)

Verisk TXTW bundled rates — each includes shingles, felt/underlayment, AND install labor in one number. Do not add separate install labor on top.

Roofing — Tear-Off, Slope & Height (per square)

Steep and height charges apply to the percentage of the roof entered on the Roof Estimate tab — matching Verisk's facet structure (7/12–9/12 and 10/12–12/12 are separate bands). Synthetic underlayment is now included on every roof automatically — no toggle, since it's standard practice. Ice & water barrier is entered per job based on actual valley/eave coverage.

Removal / Tear-Out — everything except roofing

Why these exist: every install rate in this catalog is Verisk's replace only price — it does not include pulling the old material off. Verified against TXTW_JUL26 in August 2026: the gutter rate is exactly Verisk's install-only figure, and the same is true of every fence tier. These removal rates are Verisk's remove only price for the same items, and they're added only when the rep ticks the removal box on that trade — new construction has nothing to tear out. Roofing is unaffected; it has always had its own tear-off line above.

Gutters & Guards — Christopher Yorick (sale price)
Christopher's cost to TruPro (owners only)

TruPro's own prices from Christopher Yorick's sheet, not Verisk. 3-story gutters go to Joel.

Attic Insulation ($/sq ft installed)
Fence — 6 ft privacy, 3 rails, rot board (sale price)

TruPro's own prices, set at the middle of the North Houston market (Nov 2026). Steel posts, board-on-board, cap and trim, stain, 8 ft, all-cedar framing and premium gate hardware are ticked on the Fence tab for Joel to price.

Paint — Labor (per sq ft)
Siding — Installed Cost (per sq ft)
Soffit, Fascia & Exterior Trim (installed)
Fascia by Profile — Material & Labor ($/LF)

A 1x4 and a 1x10 are not the same board. These all ship at the current single fascia rate, so nothing reprices until you set them — put the real TXTW number for each size in here. The rep picks the profile on the Siding tab, and a HOVER report fills it in automatically.

Trim Face Widths (inches)

How wide the boards actually are. This sets the surface area the paint has to cover — it does not change trim labor, which bills per linear foot.

Soffit/fascia rates include material + install. Trim rates include casing + labor. Door paint covers both sides.

Default Markup

This sets the starting markup for all estimate types. You can still adjust per job on the estimate screen.

Vents & Penetrations (installed)

Every vent and penetration count from the Inspection tab becomes its own sized line item at these rates — your material order pulls straight from this.

Material Order — Consumable Rules (ABC Supply, Internal)
Material Order — Exterior Coverage Ratios

How much one unit covers. These turn the measurements into an order instead of a flat guess — change them to match the package sizes you actually buy.

Coil nails: based on your 6-nail pattern, 1 box per 15 squares. Cap nails: 300 per square, 2,000 per box — confirmed against your real usage. Still worth a final check once ABC pricing confirms the exact box SKU, in case the box size differs by brand. Sealant/paint/decking are flat per-job defaults; decking baseline is on top of whatever the rep enters for actual measured decking replacement on the estimate. This never touches the customer estimate — it only drives the internal Material Order pushed to JobTread for review.

JobTread Photo Webhook (owners only)

Only Push All Photos to JobTread (Photos & Docs tab) uses this. It sends the customer's name, phone, address and photos here. It saves for the whole team: every phone uses the address you set. Setup: Zapier → New Zap → Trigger: Webhooks by Zapier (Catch Hook) → copy the address here → Action: JobTread.

Financing — Lender Fee

The lender fee comes from the Roof Price Book, so every phone uses the same number.

Job Type — sets which fields your rep needs to fill
Insurance
Storm / claim work — full intake
Retail / Cash
No insurance fields — faster entry
Services Requested Workflow tabs adjust to selection

Only the tabs for selected services appear up top — keeps the rep moving fast. Gutters stay paired with roofing as the prepared upsell.

Siding, paint, insulation, repairs or remodeling? Tick Other, describe it, and Joel will price it.

Existing Customer / Lead? Pulls from GHL & JobTread
Customer Information Required fields marked *
Property Address
Fill in the street and city, then tap to measure the roof and check storm history at the same time.
Roof
House picture
Storm report
Insurance Information
Appointment Details
Quick Photo Drop Dump photos in now — sort them later

For when you're moving fast: grab the photos here and do the data entry later. Works with the camera, your camera roll, or files from a laptop — including shots a sub texted you. Everything lands in Misc on the Photos & Docs tab, where you can move each one into the right section.

Roof Inspection Material-specific checklist
Property Type
Residential
Homes & multi-family
Commercial
Flat & low-slope systems
Roof Material
Inspection Mode
Quick
Pass / fail / note
Detailed
Condition + notes per item
General / Site Photos — not tied to a specific item

For overview shots, context photos, or anything that doesn't belong to one line item above. These print in their own section on the Inspection Report.

Vent Count — flows to estimate & material order
Penetrations — sized for material order
✓ These counts price the roof like for like: each vent, boot and jack is replaced with the same kind, inside the base price. Anything better is an upgrade on the estimate. Count everything, including roof jacks and dryer vents: what isn't counted here becomes a change order.
Skylights — measure & log each one
Curb-mounted skylight cross-section: glass size, curb height, and flashing ROOF DECK 1 W × L glass / dome 2 curb height 3 flashing
1Glass / dome size — measure the visible opening, width × length (outside of the frame).
2Curb height — deck to the top of the curb. 0" means deck-mounted (no curb).
3Flashing — check the step and counter-flashing around the base for gaps, rust or lifted sealant.
✓ Skylight count and flashing condition flow into the Roof Estimate's Skylight Flash Kits field and into the Material Order automatically.
Additional Materials or Services Needed

Anything you see that isn't covered above — a dryer vent that needs replacing, a chimney cap, unusual flashing, etc. Log it here so it doesn't get missed on the material order.

0
Good
0
Fair
0
Poor
0
Fail
Overall Roof Condition
Storm History Report Real NOAA data — radar & local reports

Hail & Wind Event History

Live NWS storm reports + NEXRAD radar — geocoded to this property, tiered by confidence

Pulling NOAA storm data...
Geocoding address, querying radar & local reports
Enter the property address above and tap Generate Report to pull real NOAA storm history for this location.
Roof Repair Priced from the repair menu
AI Drawing Analyzer Auto-reads measurements from any document
Instant roof from any address
Google's aerial model — total area + every facet's pitch, in seconds. Ballpark tier: verify with a report before contract pricing. Add vent counts on Inspection while you're on site.
Step 1 — Upload Drawing or Report

Upload a roof diagram, EagleView report, Hover report (PDF or Hover's JSON export — most accurate), hand-drawn sketch, or any document with measurements. Big Hover PDFs now work — they're read on your phone first. The AI auto-fills all plane dimensions below.

Drop file here or tap to browse
Works with photos, scans, PDFs, screenshots
EagleView PDF Hover Report Hand Sketch Photo Sketch App Export Any Image
Uploaded drawing
document.jpg
Step 2 — Analyze with AI
AI is reading your drawing...
Identifying roof planes and dimensions
Measurements Extracted
—
Planes Found
—
Total Sq Ft
—
Pitch Detected
PlaneLengthWidthSq Ft
Roof Measurements
Roof Pitch
rise run

6/12 Pitch

Standard residential pitch
Common in Texas construction

Roof Planes
Length (ft)
Width (ft)

Use this when your report gives a total square footage but no individual plane dimensions (most EagleView/Hover reports and inspection reports work this way). If filled in, this number is used and the planes above are ignored.

Waste / Overlap Factor15%
Standard: 10–15% for simple roofs. 15–20% for complex roofs with lots of valleys. Up to 25% for very complex or hip roofs.
0
Total Sq Ft
0
Pitch Adjusted
0
w/ Waste Factor
0
Roof Squares
1 Roofing Square = 100 sq ft · Squares are used to order materials and calculate price
Estimate Builder
Options: Like-for-Like Price
Upgrades to Offer
Line Item Breakdown
ItemQtyUnit $Total
Price Adjustments
Roof System (installed)$0
Tear-Off / Steep / Height$0
Add-Ons$0
Overhead & Profit$0
TOTAL ESTIMATE$0
AI Siding Analyzer Upload Hover report or wall diagram

Upload a Hover report (PDF or Hover's JSON export — most accurate for siding & paint), an exterior elevation drawing, or a hand-sketched diagram. Big Hover PDFs now work — they're read on your phone first. The AI extracts wall areas, trim and openings and auto-fills the fields below.

Drop Hover report or exterior diagram here
Accepts PDF, JPG, PNG — any document with wall measurements
Hover PDF Elevation Drawing Field Sketch Photo + Dims
document
Reading exterior measurements...
Identifying wall planes and dimensions
Exterior Measurements Extracted
—
Elevations
—
Gross Wall SF
—
Net Wall SF
Siding & Paint Estimate
Job Type
Siding Only
Full siding replacement
Paint Only
Exterior repaint
Siding + Paint
Full exterior
Siding Material
James Hardie — Fiber Cement
—
Premium fiber cement · 50 yr · TruPro flagship
LP SmartSide
—
Engineered wood · Impact tough · Workable
Wood Siding
—
Classic · Paintable · Requires maintenance
Wall Measurements
Enter gross wall area above — windows and doors will be deducted automatically.
Net Paintable / Sideable Wall Area0 sf
Window Survey — Material Takeoff
Photo → schedule: Snap a window, the AI identifies style, size, frame material, and pane count. Builds a window schedule for your supplier takeoff — no guess-pricing. Final window price comes from your supplier quote.
Analyzing window...
Identifying style, size, and frame material
Soffit — by Section
Overhang (in)
Run (LF)
Sq Ft
Total Soffit Area0 sf
Fascia
Trim Details

Auto-fills from the opening perimeters a report gives. Verisk prices masking as its own line — leaving it off is the most common reason a paint bid comes in low.

Paint Specification
Paint is broken into: Body (walls, primer + coats) · Trim paint (frieze, corners, rake, window & door casing by estimated width) · Soffit & Fascia · Door paint (both sides per door)
Line Item Breakdown
ItemQtyUnitTotal
Overhead & Profit0%
Verisk base — 0% markup$0
Overhead & Profit$0
SIDING / PAINT TOTAL$0
Gutter Calculator
Gutter Size — seamless aluminum
5" Standard
K-style residential
6" Oversized
Large roofs · heavy rain
Downspout Size — for the order
4" Downspout
Standard residential
5" Downspout
High-volume drainage
Building Stories — sets the downspout price
1 Story
—
2 Story
—

3 stories or taller: send it to Joel to price.

Measurements
Rule of thumb: one downspout for every 30 LF of gutter run.
Gutter Guards
What's on the house now

Defaults to the new run. Change it when what comes down isn't what goes back up.

Line Items
ItemQtyRateTotal
Gutter run (installed) 0 $0.00 $0
Downspouts (installed) 0 $0.00 $0
GUTTER TOTAL$0
Sub cost · margin after commission—
Attic Insulation
Insulation Type
Batt — Faced
—
Kraft-faced fiberglass batts · vapor barrier
Batt — Unfaced
—
Unfaced fiberglass batts · layering / sound
Blown-In Cellulose
—
Dense coverage · great for retrofits
Blown-In Fiberglass
—
Lightweight · non-settling

The $/sf rate is install only. Contaminated, rodent-damaged or water-damaged insulation has to come out first — that's a separate Verisk line, priced on the same square footage.

Overhead & Profit0%
Insulation$0
Verisk base — 0% markup$0
Overhead & Profit$0
INSULATION TOTAL$0
Fence
Fence — 6 ft privacy · 3 rails · treated 4x4 posts in concrete
Treated
—
Cedar Pickets
—
Custom (owners)
Manual $/LF for anything else
Gates — steel gate frame standard
Customer asked about — Joel prices these on a follow-up call
Fence$0
FENCE TOTAL$0
AI Scope Assistant Step 1 · Gather scope
Talk through the whole job — every trade. Add as much as you want across multiple messages. The assistant just confirms it heard you. When you're done, tap Review Scope and it'll read the full scope back before pricing anything.
Photo Documentation — Guided Work top to bottom · each section lists the shots that matter
Photos go straight into this app, not your camera roll. They're written to the phone the second you take them, so losing signal or closing the app can't lose a batch — the badge in the top bar says how many are safe. They leave the phone when you push the job to JobTread.

Note: photos of a specific inspection finding belong on the Inspection tab — the camera button on each line item welds the photo to that finding and prints it with the report. This section is the full property walkthrough.

Document Scanner Photo → PDF, or read it into a typed document
Branded Reports TruPro letterhead PDFs
Inspection Report PDF
Full inspection findings with condition ratings, flagged issues, vent counts, and inspector notes on TruPro letterhead.
Photo Report PDF
Home-inspector style report — every photo with its caption, numbered, branded, ready to send to the customer or production team.
Signature
Sign in the box below using your finger or a stylus
Sign here
Review & Finalize
Signatures Sign on the spot — or push unsigned and sign later

Signatures are applied directly to the documents below. Anything left unsigned still generates and pushes to JobTread normally.

Customer Documents — Download & Send On the Spot
Roof Estimate PDF
Full roofing scope — gutters automatically included as the prepared upsell when entered.
Roof Repair Proposal PDF
Scope of work, the repair price, what the customer initials and the repair warranty.
Siding & Paint PDF
Standalone exterior estimate for siding / paint-only customers.
Gutters-Only PDF
For the customer who just wants gutters — size, color, and story pricing included.
Insulation PDF
Attic insulation estimate with type and coverage.
Fence PDF
Fence estimate with material, height, and run length.
Storm Report PDF
700-day hail & wind history with event table — supports the insurance conversation.
Inspection Report PDF
Same branded report as the Photos & Docs tab — handy here too.
Monthly Payment Estimator — All Trades Show ▾

Show the customer a real monthly payment before any credit application. Powered by Slice® by FNBO — no personal info required. Syncs to the combined total of every trade estimated above.

Open the loan application ↗
Estimate only — not a credit offer. Actual rate, term, and payment depend on credit approval and the options the customer selects. Slice® by FNBO offers 0% APR for 18 months on qualifying plans, and standard APRs from 8.49% (with AutoPay) to 18.99%. Financing up to $150,000, terms up to 20 years, no prepayment penalty. Financing provided by First National Bank of Omaha. Customer must apply through TruPro's Slice partner link.
Share / Email Documents — straight from the app

Tap a document to open your phone's share sheet with the PDF already attached — send via Gmail, text message, or AirDrop without downloading first. On desktop browsers without share support, it downloads normally instead.

Push Back-End Data to JobTread PRODUCTION
Attach as PDF files
Sends the full technical record: every inspection item rating, vent counts, roof planes & take-off math, all estimate line items, siding & gutter details, and photo/doc counts. Photos and scanned documents travel via the branded PDF exports — attach those in JobTread until cloud storage is connected in Phase 2.